Rooster 2.5 Layer Repair Kit

This repair kit has been specially developed to fix a tear in your Rooster 2.5L Spray Top, but it can also be used for other spray tops.

You can use the repair kit by following the instructions below:

1. Make sure the spray top is free from salt water or dirt and is completely dry.
2. Cut a patch that generously covers the damaged area and place it on the inside of the spray top.
3. Turn the spray top inside out on the ironing board, with the new patch facing upwards. Place the heat-resistant paper on top of the patch.
4. Set your iron to a medium temperature (around 160°C) and press it onto the patch for 20 seconds with light pressure (do not press too hard).
5. Remove the iron and check if all edges are properly sealed. If not, repeat the process briefly until the patch is fully bonded to the spray top.

Note: Do not use too much heat, time, or pressure, as this may cause irreversible damage to the garment.